Latest News
Why Choose Air Tool Services?
- Engineers trained to OEM standards
- Free quotes
- Rapid turnaround of air tool maintenance & repair to minimise downtime
- Air tool Products & repairs fully guaranteed
- Bespoke Air Tool Design, Manufacture & Modification
- Collection & return service
- ISO quality assurance accredited
- IOSH Certified (Institute Of Health & Safety)
- Planned Preventative Maintenance (PPM) programme
- On-site HAVS Assessments
- Torque Calibration meeting UKAS standards
Refurbished and Clearance Tools
Subject to availability, we are able to offer the following reconditioned items at considerable cost savings compared to purchasing new tools. Reconditioned tools will still do the job required and can often be the solution to your budget problems.
If you don't see what you're looking for why not give us a call and see if we can help. Freephone 0800 281306
All our reconditioned tools carry a full 90 days parts and labour warranty.
Delivery charges, T's & C's apply to all purchases.
ATA Die Grinder Model: S22L
High power Die Grinder for single handed operation
Heavy deburring and grinding using 15mm (9/16") burs or 25mm (1") mounted points
Soft ergonomic sleeve for operator comfort & safety
Type CA collet. Use up to 10mm (3/8") shanks
SPECIFICATION
Model: S22L
Speed: 22,000rpm
Power: 0.63kW/0.85kW
Weight: 0.93kg
Noise Level: 71dbA
Standard Collet: 6 (Type CA)
Air Usage: 0.85m3/min
Exhaust: Front
£189.00 ex VAT
BOSCH Screwdriver - Model: 0 607 461 401
Powerful rotary screwdriver
External torque setting
Lock over clutch
Variable due to modular system
Ergonomic centre grip for optimum handling
Robust, cold insulating polyamide housing
Low vibration
SPECIFICATION
Screw diameter. Quality category 8.8
Tightening torque(Nm) hard screw driving application 30 degrees; 8.5-26
Tightening torque(Nm) soft screw driving application 720 degrees; 8.5-21
No load speed:400rmp
Weight:1.4kg
Inner hose diameter: 10mm
Trigger and push to start
£389.00 ex VAT
Huck 200 Riveter
The Huck Model 200 Installation Tool is designed to install a wide range of fasteners requiring a double action or single action installation tool. Power speed and accuracy are obtained through a pneumatic-hydraulic intensifier system powered by 90 – 100 psi air pressure.
SPECIFICATION.
Weight of 200: 10.5 lbs (4.8 kgs)
Air Pressure: 90 - 100 psi (620 - 690 kPa)
Air Consumption: 18 CFM (0,009m3/s)
Min. Stroke: 1-3/16” (30 mm)
£2495.00 ex VAT
Huck 245 Riveter
The Huck Model 245 riveter is sized for high-speed production applications, up to 20 fastener installations per minute. This tool can install fasteners up to 3/8" steel Huck Bolts, with optimum stroke for one-cycle installations. A versatile tool, the 245 features an eccentric (Offset) pull piston, allowing for better centre to edge clearance. Plated piston rods extend the life of the seals. The 245 is factory-tested for 2000 cycles, ensuring a high level of reliability. Despite its outstanding production capacity, the Model 245 weighs only 8.80 pounds.
SPECIFICATION.
Weight of 245: 8.8 lbs (4 kgs)
Air Pressure: 90 - 100 psi (620 - 690 kPa)
Stroke: .625" (15,9 mm)
Pull Force @ 90 psi: 7750 lbs (34 474N)
Speed: 30 cycles / minute
Noise Level: 85 dbA at 90 psi
PULLING HEADS (NOSE ASSEMBLIES)
Pulling Heads are not includedfurnished with riveter and must be ordered separately.
£995.00 ex VAT
Lok-Fast Model:SDA4-8MM-2-5
Lok-Fast Installation Tool – Surplus to requirements, never been used.
SPECIFICATION
Motor: 200 rpm
Socket: 2" long with QRS® System
AF Hex Key: 1/16"
AF of Socket: 5/16"
£1995.00 ex VAT
